Now There Is a Heat Battery Design

Massachusetts Institute of Technology researchers have created a material for a chemical heat ‘battery’ that could release its energy on demand. The new phase-change material provides a way to store heat in a stable chemical form, then release it later, on demand, using light as a trigger.

A good example for its use is that in large parts of the developing world, people have abundant heat from the sun during the day, but most cooking takes place later in the evening when the sun is down, using fuel – such as wood, brush or dung – that is collected with significant time and effort.

The new chemical composite developed by researchers at MIT could provide an alternative. It could be used to store heat from the sun or any other source during the day in a kind of thermal battery, and it could release the heat when needed, for example for cooking or heating after dark.

A common approach to thermal storage is to use what is known as a phase change material (PCM), where input heat melts the material and its phase change – from solid to liquid – stores the energy. When the PCM is cooled back down below its melting point, it turns back into a solid, at which point the stored energy is released as heat. There are many examples of these materials, including waxes or fatty acids used for low-temperature applications, and molten salts used at high temperatures. But all current PCMs require a great deal of insulation, and they pass through that phase change temperature uncontrollably, losing their stored heat relatively rapidly.

But the new system uses molecular switches that change shape in response to light; when integrated into the PCM, the phase-change temperature of the hybrid material can be adjusted with light, allowing the thermal energy of the phase change to be maintained even well below the melting point of the original material.

The new findings, by MIT postdocs Grace Han and Huashan Li and Professor Jeffrey Grossman, have been published in the journal Nature Communications.

Professor Grossman explains, “The trouble with thermal energy is, it’s hard to hold onto it,” So his team developed what are essentially add-ons for traditional phase change materials, or, “little molecules that undergo a structural change when light shines on them.” The trick was to find a way to integrate these molecules with conventional PCM materials to release the stored energy as heat, on demand. “There are so many applications where it would be useful to store thermal energy in a way lets you trigger it when needed,” he said.

The researchers achieved this by combining the fatty acids with an organic compound that responds to a pulse of light. With this arrangement, the light-sensitive component alters the thermal properties of the other component, which stores and releases its energy. The hybrid material melts when heated, and after being exposed to ultraviolet light, it stays melted even when cooled back down. Next, when triggered by another pulse of light, the material resolidifies and gives back the thermal phase-change energy.

“By integrating a light-activated molecule into the traditional picture of latent heat, we add a new kind of control knob for properties such as melting, solidification, and supercooling,” said Grossman, who is the Morton and Claire Goulder and Family Professor in Environmental Systems as well as professor of materials science and engineering.

The system could make use of any source of heat, not just solar, Ms Han noted. “The availability of waste heat is widespread, from industrial processes, to solar heat, and even the heat coming out of vehicles, and it’s usually just wasted.” Harnessing some of that waste could provide a way of recycling that heat for useful applications.

“What we are doing technically,” Han explained, “is installing a new energy barrier, so the stored heat cannot be released immediately.” In its chemically stored form, the energy can remain for long periods until the optical trigger is activated. In their initial small-scale lab versions, they showed the stored heat can remain stable for at least 10 hours, whereas a device of similar size storing heat directly would dissipate it within a few minutes. And “there’s no fundamental reason why it can’t be tuned to go higher,” Han said.

In the initial proof-of-concept system “the temperature change or supercooling that we achieve for this thermal storage material can be up to 10º C (18º F), and we hope we can go higher,” Grossman said.

Already, in this version, “the energy density is quite significant, even though we’re using a conventional phase-change material,” Han said. The material can store about 200 joules per gram, which she says is “very good for any organic phase-change material.” And already, “people have shown interest in using this for cooking in rural India,” she said. Such systems could also be used for drying agricultural crops or for space heating.

“Our interest in this work was to show a proof of concept,” Grossman said, “but we believe there is a lot of potential for using light-activated materials to hijack the thermal storage properties of phase change materials.”

Congratulations for your achievement folks, stay with this. There are far more applications than you are imagining now. Far far more.