6 Common Mistakes in Security System Installation and the Solutions

It is a good idea if you are planning to monitor your home or business to ensure that our household is safe and the business operations are running smoothly with the risks being covered through surveillance. Security camera installation is a worthy investment you can do for your family or business, which can ensure good value for money and the peace of mind it offers to you is invaluable.

With an excellent closed-circuit television (CCTV), you can always keep a watch of your property and also get the details to claim in case of any security breach. Depending on which area you live in and the terms of your insurer, you may even get low home insurance premiums on installing a surveillance monitoring system.

However, it may seem more straightforward when you plan to do camera installations. However, there are plenty of mistakes people used to meet while accomplishing it. Even on installing cameras, most out there are not able to enjoy the fullest benefits of it and sometimes it may also prove out to be a nuisance at the end.

So, to ensure the best advantages and high-quality video surveillance, you should be knowledgeable about these mistakes and try to avoid them while installing your CCTV cameras. We will further discuss six of such most common mistakes CCTV installers make.

1. Installing cameras on the wrong surface

As you can see, CCTV cameras are small and lightweight. Regardless of the make or design, most of the home CCTV systems take advantage of being small. However, as this equipment is lighter, it doesn’t mean that you can take the housing of it lightly to anywhere on your home or around.

Fixing the camera on the right surface, even and with a perfect angle of view is very important. Find a perfect location after close evaluation of various options. On cement or brick, you have to use some mason anchors to get it done. You may also need a power drill and bits to put adequate holes. Fix tightly and don’t let your camera blow off during the windy season.

2. Getting picture upside down when you switch on the monitoring after installation

This is a very frustrating experience but faced by many often. With a rotating head, there is a possibility that it gets ended up reversed. However, you can try a few ways to get it done. Sometimes, the software may have the option to flip the image to get it upright. To avoid this at the first point, you can put a dot or line with a crayon on the upside of the camera, and while installing the hardware, you don’t get confused with the positioning.

3. Fixing the camera at the wrong location

Better positioning of the video Security Systems Philadelphia means better images and better protection. Give it a fine consideration to fix the best locations for your security cameras. Walk around the property and do a baseline evaluation to identify the vantage points. Other things to consider are:

• Areas with and without obstructions as trees etc.
• The pattern of sunlight falling at different times of the day
• The availability of proper lighting at nighttime.

Having sunlight directly falling on to the camera will cause blind spots during sunny days. The best location to fix security camera is under the roof with a downwards angle.

4. Installing the cameras out of wireless range

Nowadays, most of the security cameras are portable wireless. Wired cameras are good to give a solid feed, but the installation of these may be difficult when compared to wireless. Wireless cameras as much easier to set up and also have less clutter to manage.

However, while using wireless cameras, it is essential to understand the range. Various camera brands will have a different range. If the camera is fixed out of the range or at the edge, the system may not function properly or blackout fully. So, always check your camera range before installing. If you have a larger property to cover, then it is ideal to go ahead with a larger then consider buying a long-range wireless camera.

5. Compromising on the number of cameras

Most of them end up with just two cameras for the front and back doors. However, covering your entire property requires more than that. Many of the self-started basic surveillance camera kits will consist of two to four cameras, which may not be enough to cover bigger properties. So, you need to do a thorough evaluation to identify the minimal number of cameras needed and the possible future requirements.

If you only have the minimal requirements as to who turned up at the front door (your kids or the UPS sales guy). However, if you want to use it for the home security purpose, then you need more cameras. You can start with a basic 2-4 camera kits but may need more cameras on the go to cover more access points. So, the key is to purchase a one-step higher DVR to add more cameras at a later stage if needed.

6. Not setting alerts

It is not possible for someone (especially in-home video monitoring) to stare at the CCTV monitor the whole day. So, what will happen if a burglar intrudes into your house and you are not watching it in real time? Even though the security cameras can scare the intruders, but no system is fully foolproof.

There are CCTV systems which can notify when the system gets tripped. With such alerts, you get instant notification or alarms when the camera captures movement at odd hours. This way, instead of simply recording break-in for future review, you get a chance to interfere at the right time and block a probable robbery attempt at the first point.

More than these, some other mistakes too which people tend to make are not installing the cameras with the power supply source in mind. It is also essential to protect your CCTV network with a password, which individuals forget to perform.