Profile image
By AmmoLand (Reporter)
Contributor profile | More stories
Story Views

Last Hour:
Last 24 Hours:

MasterPiece Arms Introduces Four New Technology Developments

Tuesday, October 4, 2016 7:25
% of readers think this story is Fact. Add your two cents.

MPA rolls out the Trinity Rail System, Bag Rider with Flush Cup, Data Card Holder and BA Lite Night Vision Bridge System designed to improve a shooter’s performance in a Precision Rifle Series event.

MPA BA Lite ChassisMPA BA Lite Chassis MPA logoMasterPiece Arms

Comer, Ga.– ( Arms (MPA), manufacturers of the MPA BA Rifles, Chassis Systems, Defender Pistols and Carbines, Suppressors and MPAR Rifles, is pleased to introduce four new technology developments that will improve shooter performance in Precision Rifle Series (PRS) events.

These new innovations are the MPA Trinity Rail System, the MPA Bag Rider with Flush Cup, the MPA Data Card Holder and the BA Lite Night Vision Bridge System.

The MPA Trinity Rail System is designed to be used on any MPA Chassis, including the MPA BA Chassis, MPA Comp Chassis and MPA BA Lite Chassis, providing an alternate location for positioning a bipod.

MPA Trinity Rail SystemMPA Trinity Rail System

This is an ideal accessory for rifles used in competitions similar to PRS events. This system allows shooters to adjust their bipod location so they can have a stable shooting position on short or limited surfaces, such as a 55-gallon drum, spools or rock outcroppings.

The MPA Trinity Rail attaches to the two slots that run the full-length of the bottom of the fore-end of the chassis body. The system includes the Trinity Rail Base, Short Bipod Picatinny Rail, (4) SHCS and (4) M-lok nuts. The system weighs 1 pound and is designed for quick and easy installation and removal. To learn about installation, use and function, watch the MasterPiece Arms BA Chassis Trinity Rail video: MSRP $59.99.

MPA Bag RiderMPA Bag Rider

The MPA Bag Rider with Flush Cup, weighing in at 1 pound, is based on an idea from Dave Preston, winner of the 2015 PRS. The purpose of the Bag Rider is to allow a consistent management of recoil when using a rear bag, while the Flush Cup, as conceived by Preston, is to be used when a sling is worn to provide support for the rifle during certain positional stances. Having the Flush Cup use the rear connection point on the bottom of the rifle allows the rifle to pull downward, as compared to side positioned flush cups which can trend the rifle laterally. The Bag Rider attaches to the user’s MPA BA Chassis, Comp Chassis or BA Lite Chassis through the threaded three-hole pattern in the bottom of the buttstock body. MSRP $29.99.

MPA Data CardMPA Data Card

The third innovation from MPA is the MPA Data Card Holder. This new system is designed to be used on any MPA full size chassis to provide a quick and effective method of viewing the shooter’s DOPE for target distances while keeping his cheek welded to the cheek riser. The Data Card has a surface similar to a dry erase board and is compatible with grease pens, dry erase pens or a Crayola® Washable Marker. When it is time to replace the data, simply wipe off the markings with a cloth or paper towel. To ensure that data isn’t accidentally erased, the shooter also has the option of putting painter’s tape on the card to write the data on and simply removing the tape when the stage or shooting session is completed.

The Data Card can be oriented top to bottom or left to right, giving the shooter multiple options for card placement, as well as the ability to write the DOPE on the card while not attached to the rifle. MSRP $49.99.

BA Lite Night Vision Bridge System BA Lite Night Vision Bridge System

The BA Lite Night Vision Bridge System is designed for use primarily with the BA Lite Chassis, but can also attach to MPA’s standard BA Chassis for special applications. More information on this item, along with availability, will be posted on within six to eight weeks.

For more information on MasterPiece Arms and their product line of pistols, rifles, carbines and suppressors, visit

About MasterPiece Arms:

MasterPiece Arms main offices, located in Comer, Georgia, combines quality engineering and state-of-the-art manufacturing to design and produce firearms, such as highly successful BA Rifles and Chassis Systems. MasterPiece Arms uses high accuracy CNC machining, turning, barrel making, laser cutting and bending in its manufacturing process controlled by their ISO9002/TS16949 Registered Quality System.

MPA engineers test and retest our weapons to provide customers with one of the most enjoyable guns available. With versatile uses such as personal and home protection, long range shooting, hunting and tactical interests, MPA products are one of a kind and backed by a lifetime warranty for original owners. Learn more about MasterPiece Arms products at or call 866.803.0000.

MasterPiece Arms is on Facebook at

This post MasterPiece Arms Introduces Four New Technology Developments appeared first on Shooting Sports News .


We encourage you to Share our Reports, Analyses, Breaking News and Videos. Simply Click your Favorite Social Media Button and Share.

Report abuse


Your Comments
Question   Razz  Sad   Evil  Exclaim  Smile  Redface  Biggrin  Surprised  Eek   Confused   Cool  LOL   Mad   Twisted  Rolleyes   Wink  Idea  Arrow  Neutral  Cry   Mr. Green

Top Stories
Recent Stories



Top Global

Top Alternative



Email this story
Email this story

If you really want to ban this commenter, please write down the reason:

If you really want to disable all recommended stories, click on OK button. After that, you will be redirect to your options page.