A Simple Non-Electric Milking Machine

The time has arrived that I need to employ a milking machine instead of continuing to hand milk our goats. This time has arrived much sooner than I had hoped, but the arthritis in my hands have made that decision for me. I have a finger that will no longer straighten unless I work on it for a while. It is affecting my grip and I’m dropping a lot of things. Rats. One of the biggest draw backs for me is that I really enjoy milking my goats. I’m sure I still will, it will just be different. I can enjoy the still of the morning, watching the animals and listening to the birds, it will just be different. As the goats and I get used to this new routine, I’m sure there will be challenges and adjustments along the way, so later on, I’ll do an update on my new milking routine and tell you what I’ve learned. For now, here is my very first experience with this machine.

I can’t say our milking machine is new because I bought it several years ago. It’s been in a storage building awaiting the time that I needed it. This is an example of storing things that will become useful in the times to come. If you have a future project that will make life easier and more productive after the SHTF, and you can afford it now, acquire what you think you will need now and store it away. It will wait for you, just like this milker.

Back when I researched and looked for a simple milking machine the Henry Milker out of Alaska was the only one I found, so I got one. Now there are several companies that have similar products like the one Patrice Lewis at Rural Revolution uses, the Udderly EZ Milker. Patrice did an article on how she uses one to milk her cow here.  If there is anyone out there that uses or has experience with a non-electric milking machine, please share with us. I would really appreciate anything you can share. I wrote this part of the article before we went to the barn and tried out the machine. You’ll realize why I said this later on.

The components of our milking kit included the vacuum pump, four tubes, two tube cleaning brushes, two wide mouth quart jars, two lids, a micro fiber cloth and a carrying case. The directions are simple and easy to follow.

Copper, our three year old doe, was the victim for the first trial of milking with this machine. This is the second year we have milked Copper and she is very easy going and a good milker. She looked at me a few times as I fumbled around trying to get the bucket, which we brought to protect and support the jar, and the syringe that goes over the teat in place to begin this process.

At first I couldn’t get a good suction going so the pressure would build up a vacuum and begin withdrawing the milk. With Frank’s help, we finally got things going and the milk flowing.

The pressure gauge has to be pumped much more often than I expected, and even though I had to squeeze it less often than if I had milked by hand, it really wasn’t that different than milking by hand except I didn’t have to squeeze as hard.

I had to restart the suction/vacuum process twice on each teat because the milk stopped flowing. The directions included this possibility, and directed to release the syringe from the teat and start over, which we did.

Even with restarting twice on each teat, we only withdrew about half of Copper’s milk. The rest I ended up milking out by hand into the bucket. I’m glad Frank recommended we bring it.

I’m sure with practice this machine would withdraw more of the milk, and I would be get much more adept. Even with all of the commotion of trying to figure out this machine, Copper was very cooperative through it all, and I was grateful. Frank did end up feeding her quite a bit more than usual just to keep her occupied while I tried the milker and he took the pictures. Even the flash on the camera didn’t bother her. She did a very good job.

The Henry Milker worked just as advertised. The instructions and videos found on their website were helpful since I did run into a few things that were mentioned. Because I had access to the information ahead of time, I knew what to do when these situations occurred.

Pros? The milk goes directly into the jar which prevents any hair or dust from getting into it like it does when you hand milk into a bucket. The milk doesn’t have to be filtered. Just change out the lid for a regular plastic one and put the jar in a bucket of water to chill, then into the refrigerator it goes. Even inexperienced people could milk an animal using this machine.

Cons? I have read in other places and heard from an acquaintance that you still need to finish the milking by hand if you want to

make sure you get all of the milk and keep production to a maximum. The thing I noticed as we were increasing the pressure to create the vacuum and get the milk to flow, was that Copper’s teat was pulled down and lengthened in the syringe. My first thought was that I didn’t like that. What will that do to the tissue of her teat if this process is repeated over and over twice a day? Will it cause the teats to lengthen and stay that way? Will it cause them to loosen and lose their natural elasticity and break down the structure of the orifice? Will it cause them to leak over time because the tissues have been stretched so often?

I don’t even know if these are questions that address a valid concern, but my first thought was I don’t want that to happen to my does’ udders. I have grown very particular about the udders my does have and we have bred them to have certain characteristics. Another thing that has caused this concern is a video about another company that makes non-electric goat milking machines that shows the process compared to an electric milking machine. Some of the does in this video have very large teats and the suctioning motion of the electric milking machine rhythmically pulls on the teats. I think this process over time has caused part of the shaping of the teats. I don’t see how it can keep from it. There are also some people that prefer a large bulbous type of teat, even for hand milking, because you get more milk per squeeze, therefore you don’t have to squeeze as many times to get the same amount of milk as a doe with smaller teats. Maybe I am just backward in my choice of goat teats, but I don’t think so. I think the straight, smaller structure of this type of teat is much closer to what is found in nature as opposed to what is found with structured breeding practices.

So, what about my arthritis? I don’t know. But for now I will continue milking by hand and doing the best I can. I may need to limit how many goats I have in milk at once, I don’t know. It is very interesting to finally get to a place where I thought I would have to give in and quit milking by hand even though I didn’t want to. Now that I have tried it, I really don’t want to use a machine, not unless I really, really, really have to, and for now I don’t have to, so I’m not. I thought about just deleting this article and not finishing it, but then again I thought maybe it would be of use to someone, so here it is. Food for thought.

Until next time – Fern

Visit Thoughts From Frank and Fern at http://thoughtsfromfrankandfern.blogspot.com/