Profile image
By New Energy And Fuel (Reporter)
Contributor profile | More stories
Story Views

Now:
Last Hour:
Last 24 Hours:
Total:

New Graphene Based Design For Converting Heat to Energy

Thursday, March 9, 2017 0:09
% of readers think this story is Fact. Add your two cents.

(Before It's News)

Stanford University researchers led by Professor Roger Howe say new material using graphene could reignite the field of thermionic energy conversion, improving the way we produce electricity and reducing the impact the process has on the environment.

Left: schematic sketch of the thermionic energy convertor prototype with a graphene collector. Right: Photograph of the TEC prototype during operation in the Stanford lab. Image Credit: Stanford University. Click image for the largest view.

The concept is based on a satellite-powering technology that was abandoned decades ago that has been reinvented to potentially work with traditional power stations to help them convert heat to electricity more efficiently. The idea suggests there would less need of fossil fuel to burn for power.

The new study, published in Nano Energy, presents a prototype energy converter, which uses graphene instead of metal, making it almost seven times more efficient.

Energy is one of the most challenging problems society faces today, with an estimated 1.2 billion people having no access to electricity. Thermal energy is one of the most abundant, cheap and widely used energy sources in the world, but it is harvested using old technology: more than 80 percent of the electricity generated in the US comes from mechanical heat engines and turbines based on the 19th century technology that can only be used in large power stations.

Alternatively, the thermionic energy convertor (TEC) can convert heat to electricity more efficiently without the need for big, expensive equipment through the phenomenon of thermionic emission. TECs were first developed in the 1950s for use in space programs, but scientists had not managed to make TECs efficient enough to apply to industrial electricity production. Now, with modern materials and approaches, it is possible to improve their efficiency significantly.

The TEC is composed of two electrodes, namely the emitter and collector, separated by a small vacuum gap. The researchers tested a prototype TEC made using a single sheet of carbon atoms – graphene – instead of tungsten as the collector material. They found the new material improved the efficiency of the TEC, making it 6.7 times more efficient at converting heat into electricity at 1000º C.

Lead author Dr. Hongyuan Yuan from Stanford University said, “TEC technology is very exciting. With improvement in the efficiency, we expect to see an enormous market for it. TECs could not only help make power stations more efficient, and therefore have a lower environmental impact, but they could be also applied in distributed systems like solar cells. In the future, we envisage it being possible to generate 1-2 kW of electricity from water boilers, which could partially power your house.”

Currently, existing TEC technology faces two obstacles: a high loss of energy at the anode surface, which leads to reduced output voltage, and high electrical barriers against electrons moving in the gap between the collector and the emitter, which results in reduced output current. For the first time, the new prototype tackles both of these problems simultaneously. The findings of the study reveal an electronic efficiency in energy conversion of 9.8 percent – by far the highest efficiency at 1000º C.

The technology is not yet ready for use in power stations or people’s homes – the prototype works in a vacuum chamber but not in a normal setting. The researchers are now working on a vacuum packaged TEC to test the reliability and efficiency of the technology in real applications.

“This prototype is just the first step – there is a lot more to do,” said Dr. Yuan. “But our results so far are promising and reflect a happy marriage between modern materials science and an old-fashioned energy technology, which provides a route for re-sparking the field of thermionic energy conversion.”

Looks good, sounds great. There is just one matter of concern. The researchers are looking at 1000º C or 1832º F. This is quite hot and requires a noteworthy amount of care to keep the heat from migrating to other items. Paper ignites at about 451º F.



Source: http://newenergyandfuel.com/http:/newenergyandfuel/com/2017/03/09/new-graphene-based-design-for-converting-heat-to-energy/

Report abuse

Comments

Your Comments
Question   Razz  Sad   Evil  Exclaim  Smile  Redface  Biggrin  Surprised  Eek   Confused   Cool  LOL   Mad   Twisted  Rolleyes   Wink  Idea  Arrow  Neutral  Cry   Mr. Green

Top Stories
Recent Stories
 

Featured

 

Top Global

 

Top Alternative

Register

Newsletter

Email this story
Email this story

If you really want to ban this commenter, please write down the reason:

If you really want to disable all recommended stories, click on OK button. After that, you will be redirect to your options page.