Purifying Water With Bleach

If boiling your water is not possible, then Purifying water with bleach, such as Clorox (or Purex) is a good solution. Standard household bleach is typically between 5 percent and 6 percent chlorine. Avoid using bleaches that contain perfumes, clarifiers, dyes and other additives. Be sure to read the label.

Purifying water with bleach

When Purifying water with bleach, Only use bleach that is made with Calcium Hypochlorite. Place the water (filtered, if necessary) in a clean container. Add the amount of bleach according to the table below. Mix thoroughly and allow the water to stand for at least 30 minutes before using (60 minutes if the water is cloudy or very cold). Purifying water with bleach:

You should filter water prior to treating with bleach. You can use coffee filters, or towels/shirts. Only use bleach that is made with Calcium Hypochlorite.

Purifying water with bleach is safe if you follow the proper guidelines and use the correct type of bleach. You can always buy water purification, if you fear the “do it yourself” method.

If you need a portable solution there is the LifeStraw, which can filter up to 1000 liters (264.172 gallons) of water and the Sawyer Mini, which can filter up to 378,541 liters (100,000 gallons).

See the Original Post at: Purifying Water with Bleach

Also see these posts:

• DIY Home Water Filter
• Disinfect Water with Calcium Hypochlorite
• Purifying water with bleach
• Restricted Water and the Secret Weapon to Access It
• Water Filter Systems for Preppers
• Bug-Out Bag with 1000 Liters of Water