Resolving Connection Issues On Your Wi-Fi Network

One of the private internet protocols address that give you access to a perfect match for your high qualified address is 192.168.1.2. Actually, it is a default IP address used by many network companies for producing the router devices in order to provide easy access to the latest software installs. If the user finds any internet connection problems while accessing the software application that is very easy to control as well as modify the settings by using the default IP address. When it comes to access the modem management control panel, you just login to http://192.168.1.2 in order to obtain the fully qualified access to the network authoritative.

Important methods to troubleshoot your Wi-Fi connection issues

Basically, the wireless connectivity issue is a common problem for all the internet users, which become a rough and tough condition. If your internet connection is too slow, the pages are not loading and always show the error messages like no connectivity or limited connection. Nowadays, there are wide ranges of solutions for resolving the connectivity issues that you need to understand and follow it properly. When it comes to troubleshooting your wireless connectivity issues, there are some well-known methods available that helps you to establish the main cause of your Wi-Fi connectivity issues as well as fix the problems as soon as possible.

Reboot the wireless router- It is one of the simplest methods to fix the connectivity problems. Initially, you switch off the router devices and turn it off for minimum 1 minute and then turn it back once again. After that, you just try to reconnect your wireless network.

Remove and re-add the wireless router- This is a wise option to resolve the connection problems on your device.

• First, go to Network and Sharing Center and then select the Manage Wireless Networks.
• Now, right click on the wireless network and then choose the option Remove Network from the drop down list.
• Again click the Network and Sharing Center and click Connect to a Network. Finally, select your specific network from the list.

Perform diagnostic repair- To connect your wireless network, you can also do the diagnostic repair to fix the problems.

• Go to Start-> Control Panel-> Network and Internet-> Network and Sharing Center.
• Now you click on the Change Adapter Settings.
• To diagnose the problem, you just right click on your Wireless Network Adapter and then choose Diagnose.
• Finally, you try this diagnostic option and then resolve the issue.

Verify the settings on your wireless router- In some cases; the wireless connection problem has occurred due to some changes in the setting. It can also be very easy to fix and resolve in the following ways,

• First go to Network and Sharing Center and then select Change Adapter Settings. In order to connect to the internet, you just right click on your network device and then select Status. This will open the Network Connection Settings dialog box. In that, you will select the Details button.
• Once you have selected the details button, the network connection details dialog box will appear and you can note down the IPv4 default internet protocol address to change the settings on your wireless router devices.

Reset the TCP/IP stack- The TCP/IP stack is one of the major window components of your internet connection. In some cases; this stack can become damaged or corrupted that may cause connectivity issues.

• To resolve this issue, you just access the command prompt by clicking on Start and type CMD in the search bar or select the Run as Administrator option.
• Once the command prompt will open, you just type the command as,

netsh int ip reset reset.log

netsh winsock reset catalog

Steps to be followed for resolving the connection issues

In order to resolve the connection issues on your Wi-Fi network, here are the three major steps to be followed such as,

• Resolving the wireless connection issues
• Turn off and turn on all the network devices
• Configure the wireless adapter settings for better performance   
• Initially, you just move your computer from 3 to 9 feet of the wireless router.
• Make sure that your wireless device switch is turning on and also look for the wireless icon whether it is turned on or off.
• Now, go to start page and then click Desktop.
• You right click on the network icon of your task bar and then click the troubleshoot problems.
• In order to synchronize the devices, you should turn off and turn on all devices on the network section.
• You should also ensure that the latest device driver is installed.
• To obtain better performance, you can configure the wireless adapter settings.

However, these are all effective ways to fix and diagnose the connectivity problems on your wireless router devices. Let you try to connect your Wi-Fi network again and enjoy the connection.