Profile image
By Alton Parrish (Reporter)
Contributor profile | More stories
Story Views

Now:
Last Hour:
Last 24 Hours:
Total:

Graphene Foam Gets Big and Tough: Nanotube-Reinforced Material Can Be Shaped, Is Highly Conductive

Wednesday, February 15, 2017 14:31
% of readers think this story is Fact. Add your two cents.

(Before It's News)

A chunk of conductive graphene foam reinforced by carbon nanotubes can support more than 3,000 times its own weight and easily bounce back to its original height, according to Rice University scientists.

Better yet, it can be made in just about any shape and size, they reported, demonstrating a screw-shaped piece of the highly conductive foam.

The Rice lab of chemist James Tour tested its new “rebar graphene” as a highly porous, conductive electrode in lithium ion capacitors and found it to be mechanically and chemically stable.This macroscale piece of rebar graphene was formed into a screw shape. The highly conductive foam was tested as an electrode in lithium ion capacitors and found to be mechanically and chemically stable.

Credit: Tour Group/Rice University

The research appears in the American Chemical Society journal ACS Applied Materials and Interfaces.

Carbon in the form of atom-thin graphene is among the strongest materials known and is highly conductive; multiwalled carbon nanotubes are widely used as conductive reinforcements in metals, polymers and carbon matrix composites. The Tour lab had already used nanotubes to reinforce two-dimensional sheets of graphene. Extending the concept to macroscale materials made sense, Tour said.

Credit: Rice University

“We developed graphene foam, but it wasn’t tough enough for the kind of applications we had in mind, so using carbon nanotubes to reinforce it was a natural next step,” Tour said.

The three-dimensional structures were created from a powdered nickel catalyst, surfactant-wrapped multiwall nanotubes and sugar as a carbon source. The materials were mixed and the water evaporated; the resulting pellets were pressed into a steel die and then heated in a chemical vapor deposition furnace, which turned the available carbon into graphene. After further processing to remove remnants of nickel, the result was an all-carbon foam in the shape of the die, in this case a screw. Tour said the method will be easy to scale up.

Electron microscope images of the foam showed partially unzipped outer layers of the nanotubes had bonded to the graphene, which accounted for its strength and resilience. Graphene foam produced without the rebar could support only about 150 times its own weight while retaining the ability to rapidly return to its full height. But rebar graphene irreversibly deformed by about 25 percent when loaded with more than 8,500 times its weight.

Contacts and sources:
David Ruth
Rice University
Citation: Three-Dimensional Rebar Graphene  Authors: Junwei Sha, Rodrigo Villegas Salvatierra, Pei Dong, Yilun Li, Seoung-Ki Lee, Tuo Wang, Chenhao Zhang, Jibo Zhang, Yongsung Ji, Pulickel M Ajayan, Jun Lou, Naiqin Zhao, and James M. Tour ACS Appl. Mater. Interfaces, Just Accepted Manuscript DOI: 10.1021/acsami.6b12503



Source: http://www.ineffableisland.com/2017/02/graphene-foam-gets-big-and-tough.html

Report abuse

Comments

Your Comments
Question   Razz  Sad   Evil  Exclaim  Smile  Redface  Biggrin  Surprised  Eek   Confused   Cool  LOL   Mad   Twisted  Rolleyes   Wink  Idea  Arrow  Neutral  Cry   Mr. Green

Top Stories
Recent Stories
 

Featured

 

Top Global

 

Top Alternative

Register

Newsletter

Email this story
Email this story

If you really want to ban this commenter, please write down the reason:

If you really want to disable all recommended stories, click on OK button. After that, you will be redirect to your options page.