Supersaurus, Ultrasaurus and Dystylosaurus in 2019, part 2b: the size of the BYU 9024 animal

In part 2, we concluded that BYU 9024, the large cervical vertebra assigned by Jensen to the Supersaurus holotype individual, is in fact a perfectly well-behaved Barosaurus cervical — just a much, much bigger one than we’ve been used to seeing. Although we heavily disclaimered our size estimates, Andrea Cau quite rightly commented:

Thanks for the disclaimer: unfortunately, it is going to be ignored by the Internet.
[…]
So, my boring-conservative mind asks: what is the smallest size that is a valid alternative explanation? I mean, if we combine all possible factors (position misinterpretation, deformation effects, allometry and so on) what could be the smallest plausible size? Only the latter should be taken as “the size” of this animal, pending more material.

Andrea is right that we should take a moment to think a bit more about the possible size implications of BYU 9024.

BYU 9024, the huge cervical vertebra assigned to Supersaurus but which is actually Barosaurus, in left dorsolateral view, lying on its right side with anterior to the right. In front of it, for scale, a Diplodocus cervical from about the same serial position. (Note that the Diplodocus vertebra here appears proportionally bigger than it really is, due to being much closer to the camera.)

What we know for sure is that the vertebra is 1380 mm long (give or take a centimeter or two due to the difficulties of measuring big complex bones in an objective way, something we should write about separately some time.)

We are 99% certain that the bone is a Barosaurus cervical.

We are much less certain about the serial position of that bone. When we were at BYU, we concluded that it most resembled C9 of the AMNH specimen, but I honestly can’t remember the detail of our reasoning (can you, Matt?) and our scanned notebooks don’t offer much in the way of help. We know from McIntosh (2005) that the neural spine of C8 is unsplit and that C9 has the first hint of a cleft.  How does that compare with BYU 9024? Here’s a photo to help you decide:

BYU 9024, large cervical vertebra in left dorsolateral view, inverted (i.e. with dorsal towards us and anterior to the right). Note the shallow cleft between metapophyses at bottom left.

And here’s an anaglyph, to help you appreciate the 3D structure. (Don’t have any red-cyan glasses? GET SOME!)

BYU 9024, oriented similarly to the previous photograph.

The morphology around the crown of the neural spine is difficult to interpret, partly just because the fossil itself is a bit smashed up and partly because the bone, the (minimal) restoration and the matrix are such similar colours. But here’s my best attempt to draw out what’s happening, zoomed in from last non-anaglyph photo:

As you start at the prezygapophyses and work backwards, the SPRLs fade out some way before you reach the crown, and disappear at or before what appears to be an ossified midline ligament scar projecting anteriorly from very near the top of the vertebra. Posterior to that are two small, tab-like metapophyses that appear almost like separate osteological features.

Now this is a very strange arrangement. Nothing like it occurs in any of the cervicals of Diplodocus, where all the way from C3 back to the last cervical, the SPRLs run continuously all the way up from the prezygs to the metapophyses:

Hatcher (1901:plate V). Diplodocus carnegii holotype CM 84, cervical vertebra 2-15 in anterior view.

What we’d love to do of course is compare this morphology with a similar plate of the AMNH Barosaurus cervicals in anterior view, but no such plate exists and no such photos can be taken due to the ongoing entombment of the vertebrae. So we’re reduced to feeding on scraps. McIntosh (2005:47) says:

The neural spine of cervical 8 is flat across the top, and that of cervical 9 shows the first trace of a divided spine (Fig. 2.2A). This division increases gradually in sequential vertebrae, being moderately developed in cervicals 12 and 13, and as a deep V-shape in cervicals 15 and 16.

Sadly, McIntosh illustrates only cervicals 8 and 13 in anterior view: Fig 2.2A does not illustrate C9, as the text implies. And neither of the illustrated vertebrae much resembles what we see in BYU 9024.

So while in 2016 we interpreted BYU 9024 is having “the first trace of a divided spine”, we do hold open the possibility that what we’re seeing is a vertebra in which the spine bifurcation is a little more developed than we’d realised, but with strange morphology that does not correspond closely to any well-preserved vertebra we’ve seen of any sauropod. (Most Barosaurus cervicals are either crushed and damaged; the well preserved ones outside of the AMNH walkway tomb are from a more anterior part of the neck where there is no bifurcation of the spine.)

There is one more possibility. Here is a truly lovely (privately owned) Barosaurus cervical in the prep lab at the North American Museum of Ancient Life (NAMAL):

Uncrushed Barosaurus cervical vertebra, serial position uncertain, in the NAMAL prep lab.

In this blessedly undistorted vertebra, we can see that the summit of the neural spine is flared, with laterally projecting laminae that are likely homologous with metapophyses. (The vertebra is symmetrical in this respect.) Might it be possible that the tab-like metapophyses of BYU 9024 were like this in life, but have been folded upwards post-mortem?

All of this leaves the serial position of the vertebra far from certain. But what we can do is compare it with the lengths of all the known AMNH Barosaurus vertebrae. Columns 1 and 2 in the table below show the serial position and total length of the AMNH cervicals. Column 3 shows the factor by which the 1370 mm length of BYU 9024 exceeds the relevant cervical, and column 4 shows the corresponding estimate for total neck length, based on 8.5 m (Wedel 2007:206–207) for AMNH Barosaurus.

So to finally answer Andrea’s question from waaay back at the start of this post, the smallest possible interpretation of the BYU 9024 animal gives it a neck 1.584 times as long as that of the AMNH individual, which comes out around 13.5 m (and implies a total length of maybe 43 m).

But I don’t at all think that’s right: I am confident that the serial position of BYU 9024 is some way anterior to C14, likely no further back than C11 — which gives us a neck at least 15 m long (and a total length of maybe 48 m and a mass of maybe 12 × 1.768^3 = 66 tonnes).

References

• Hatcher, Jonathan B. 1901. Diplodocus (Marsh): its osteology, taxonomy and probable habits, with a restoration of the skeleton. Memoirs of the Carnegie Museum 1:1-63 and plates I-XIII.
• McIntosh, John S. 2005. The genus Barosaurus Marsh (Sauropoda, Diplodocidae). pp. 38-77 in: Virginia Tidwell and Ken Carpenter (eds.), Thunder Lizards: the Sauropodomorph Dinosaurs. Indiana University Press, Bloomington, Indiana. 495 pp.
• Wedel, Mathew J. 2007. Postcranial pneumaticity in dinosaurs and the origin of the avian lung. Ph.D dissertation, Integrative Biology, University of California, Berkeley, CA. Advisors: Kevin Padian and Bill Clemens. 290 pages.