Halted Orbit Crop Circle

Can Zeta comment on the New Crop Circle reported at Hunt’s Down, near Wilton, Wiltshire, UK, today, the 17th of June, 2020. Is Nibiru reaching the Eliptic during a solstice/equinox span? I got a core felling of spinning alteration when I am looking at it too. [and from another] http://cropcircleconnector.com/2020/huntsdown/huntsdown2020a.html Hunt’s Down, Nr Wilton, Wiltshire. Reported 17th June

Hunt’s Down is a legitimate Crop Circle design, with an obvious and singular message. The Sun rotates in a counterclockwise direction when the Solar System is viewed from above. This is depicted by the fan in the center of the design. The cutting edge of the fan blades are positioned to encounter mankind’s calendar locations for Solstice and Equinox, which are depicted by the four points around the Sun. Planet Earth was halted in her orbit in December of 2003 by encountering Nibiru in her orbit, and was then pushed back into the August position.

Thus during this time of the Earth’s halted orbit, the Earth has not been in the proper position for the Summer Solstice, and the illusion that this was the case was done by benign aliens working under the Council of Worlds direction to allow mankind more time to adjust to the realization that Nibiru had arrived. This is shown by the position of Earth on right hand side of Hunt’s Down, as it is half way between what would be the Summer Solstice on June 20 and the Fall Equinox on September 22.

How will the actual position of the Earth in the August position affect mankind’s view of the Summer Solstice? The constellations have not aligned with the assumption that the Earth is orbiting the Sun, but anyone daring to point this out is ridiculed. The Earth wobble has become obvious, with the angle of sunlight and the location of the Sun at sunrise or sunset blatantly wrong. As we noted during our analysis of the Stonehenge design, the benign subterfuge that all is normal will begin to be dropped, so that Nibiru and the halted orbit can be realized.

Source:ZetaTalk Chat Q&A for June 30, 2020