Introduction of HX series crushers

At present crusher is most widely used in a variety of ore separating line . The mineral ore is usually in irregular shape and generally relatively large size when first exploited. So we must first extract the metal from the ore, and then process artificial sand or other deep-processing and utilization, which will require jaw crusher to crush the ore.
Now let’s begin to analyze the performance characteristics of Hongxing Machinery jaw crusher. First is its simple structure, reliable quality and relatively low operating costs. In addition, it makes lower noise and generates less dust. Its gasket discharge opening can be adjusted according to the needs. The large adjustment range greatly increases the flexibility of the equipment and the wide application range meets the requirements of different users. In particular, under today’s promotion of energy saving and environmental protection, the advantages of Hongxing Machinery jaw crusher in energy saving is very obvious. One machine can save energy 15% to 30%, and the entire system can save more than doubled, which greatly reduces operating costs for enterprises and lightens its burden.
Aboard hammer and liner plate of impact crusher are easy to wear, which need routine maintenance. At present, the aboard hammer and liner plate in our country mainly made from high manganese steel. For the difference of heat treating materials, its service life is different. Our country also developed a kind of impact hammer made from Low alloy white cast iron or high chromium iron, which has the features of high hardness, good abrasive resistance, simple production, low investment, and has achieve a good effect.
In the carbon steel aboard hammer, some manufacturer use “up weld 64” and “up weld 64A” welding rod to surfacing a layer, or use High-manganese steel electrode to surfacing in the High-manganese steel electrode, these methods can reduce wear, and repair old aboard hammer or impact plate. The shape and fix methods of aboard hammer is important to maintenance. The shape of aboard hammer should be convenient to dismounting, and improve the metal utilization ratio. The weight of aboard hammer should be exact, and its error should not be exceeding 0.5kg that to make sure the stable of machine. During Rotor static balance test, rotor should not rotate 1/10 circle when it stop in any point.
Having known the reason, we can suit the remedy according to the actual situation. Henan Hongxing has researched  for more than 30 years. During this period, they summed up their own programs, welcome vast numbers of friends to our service department consulting, please call at: 86-371-67776666.