Garage Door Repair Trouble Shooting Steps

For all garage door repair issues, try troubleshooting them before hiring a specialist.

For all garage door repair in Columbus, there are certain troubleshooting steps that you can try before calling a specialist. Let us discuss some of them in this section. Firstly, you need to check the electricity. It can be that the electricity is not getting to the garage door electrical components. If the problem is something more than the plug that has come out of the socket, then go ahead and call a repair specialist. If everything appears okay with the flow of electricity then proceed to the next step. Next step is pulling out the emergency chain. If the door does not open, then move on to the next step. Thirdly, check if there is an obstruction in the door track. There can be small pebbles or hard packed dirt balls that can stop the door from moving. In this case, the obstruction needs to be removed. Fourthly, check for the damage on the door itself. If there is any damage to the door fix them and see if it reduces the problem. Fifthly, allow the motor of the garage door opener to cool for 20 minutes. It can be that the opener has over heated or it is over loaded. The auxiliary push buttons needs to be pressed. If the door does not work still then a faulty push button controller can be blamed. In the next step, check the transmitter batteries needs to be replaced. Still if the problem is not resolved, look into the next step. Sometimes your neighbor can be using your garage door code and this can stop functioning properly. To avoid the problem change the security code. Ensure the door bracket and the headers are securely fastened and inspect to see if it has been aligned correctly. Try these troubleshooting steps before hiring a specialist in Columbus that can help functioning the garage door.

What can be a common problem with the garage door?

In Columbus, if you have roll up doors and are not shutting properly or if it frequently comes back open, you need to check rollers are not binding. This is a common problem that can occur. Most of the time, the issue is very simple to fix. For instance, it can be a loose hinge that requires simple tightening. It can be a broken roller that should be replaced. Sometimes, the rollers and the track need lubrication for smooth operation.

Do you have a sagging garage door?

Wood garage door is one large piece and have the tendency to sag in the middle. This is a very simple repair. All that needs to be done is wedge in spacers between the garage door and the rods.

Are you looking for more information regarding garage door repair in Columbus? Visit http://www.comptongaragedoors.com/garage-door-repair today!