A Way Found To Make Hydrogen With An Aluminum Catalyst

University of California – Santa Cruz scientists’ study shows that an easily produced composite of gallium and aluminum creates aluminum nanoparticles that react rapidly with water at room temperature to yield large amounts of hydrogen. For years, researchers have tried to find efficient and cost-effective ways to harness the extreme reactivity of aluminum to generate clean hydrogen fuel.

Aluminum is a highly reactive metal that can strip oxygen from water molecules to generate hydrogen gas. Its widespread use in products that get wet poses no danger because aluminum instantly reacts with air to acquire a coating of aluminum oxide, which blocks further reactions.

A new study by researchers at UC Santa Cruz shows that an easily produced composite of gallium and aluminum creates aluminum nanoparticles that react rapidly with water at room temperature to yield large amounts of hydrogen. The gallium was easily recovered for reuse after the reaction, which yields 90% of the hydrogen that could theoretically be produced from reaction of all the aluminum in the composite.

UCSC Chemistry Professor Scott Oliver said, “We don’t need any energy input, and it bubbles hydrogen like crazy. I’ve never seen anything like it.”

Oliver and Bakthan Singaram, professor of chemistry and biochemistry, are corresponding authors of a paper on the new findings, published in Applied Nano Materials.

The reaction of aluminum and gallium with water has been known since the 1970s, and videos of it are easy to find online. It works because gallium, a liquid at just above room temperature, removes the passive aluminum oxide coating, allowing direct contact of aluminum with water. The new study, however, includes several innovations and novel findings that could lead to practical applications.

A U.S. patent application is already pending on this technology.

Singaram said the study grew out of a conversation he had with a student, coauthor Isai Lopez, who had seen some videos and started experimenting with aluminum-gallium hydrogen generation in his home kitchen.

“He wasn’t doing it in a scientific way, so I set him up with a graduate student to do a systematic study. I thought it would make a good senior thesis for him to measure the hydrogen output from different ratios of gallium and aluminum,” Singaram said.

Previous studies had mostly used aluminum-rich mixtures of aluminum and gallium, or in some cases more complex alloys. But Singaram’s lab found that hydrogen production increased with a gallium-rich composite. In fact, the rate of hydrogen production was so unexpectedly high the researchers thought there must be something fundamentally different about this gallium-rich alloy.

Oliver suggested that the formation of aluminum nanoparticles could account for the increased hydrogen production, and his lab had the equipment needed for nanoscale characterization of the alloy. Using scanning electron microscopy and x-ray diffraction, the researchers showed the formation of aluminum nanoparticles in a 3:1 gallium-aluminum composite, which they found to be the optimal ratio for hydrogen production.

In this gallium-rich composite, the gallium serves both to dissolve the aluminum oxide coating and to separate the aluminum into nanoparticles. “The gallium separates the nanoparticles and keeps them from aggregating into larger particles,” Singaram said. “People have struggled to make aluminum nanoparticles, and here we are producing them under normal atmospheric pressure and room temperature conditions.”

Making the composite required nothing more than simple manual mixing.

Oliver said, “Our method uses a small amount of aluminum, which ensures it all dissolves into the majority gallium as discrete nanoparticles,” Oliver said. “This generates a much larger amount of hydrogen, almost complete compared to the theoretical value based on the amount of aluminum. It also makes gallium recovery easier for reuse.”

The composite can be made with readily available sources of aluminum, including used foil or cans, and the composite can be stored for long periods by covering it with cyclohexane to protect it from moisture.

Although gallium is not abundant and is relatively expensive, it can be recovered and reused multiple times without losing effectiveness, Singaram said. It remains to be seen, however, if this process can be scaled up to be practical for commercial hydrogen production.

First author Gabriella Amberchan is graduate student in Singaram’s lab. Other coauthors of the paper include Beatriz Ehlke, Jeremy Barnett, Neo Bao, and A’Lester Allen, all at UCSC. This work was partially supported by funds from the Ima Hernandez Foundation.

***

You can safely bet someone(s) are going to try to scale this up and figure out a way to commercialize it. It pretty close to making a hydrogen economic system viable. Moreover it might solve the hydrogen storage matter simply by production on demand instead of a leaky potential bomb nearby.

The question becomes the energy used to get the gallium and aluminum ready in the first instance and recycled for the second and further instances. One does wonder about the electrical power needed exceeding and by how much of the hydrogen energy output. It may be close and if so, this technology should become a revolution.

The post A Way Found To Make Hydrogen With An Aluminum Catalyst first appeared on New Energy and Fuel.