How TEG Power Generator & Thermoelectric Generator Work
How TEG Power Generator & Thermoelectric Generator Work
Newly designed thermoelectric power generators (TEG), will operate at an industry leading 7-8% efficiency. Our research goal is to increase that to 10% net efficiency. First prototype elements were tested in February 2009 with some success. The new element design will eventually be manufactured on automated equipment, making them the first to be manufactured using full automation.
The new elements are very high power in the 100 to 200 amp power range. The cost to produce these elements should be lower than present elements in large quantities with greater power output ability.
Thermal Electronics corp. designs Thermoelectric (TEG) power generators using the Seebeck effect for large and small applications.The above unit uses a sterno to produce 4-6 watts of power @ 12 VDC. Enough power to recharge a mobile phone, or operate a radio.
Our goal is to supply industrial facilities and Car Manufactures with turn key Thermo Electric Power Generators (TEG) systems to reclaim valuable waste heat and convert it directly into electric power.
The next phase of development will involve contact and how to effectively lower electrical and thermal resistance. The phase will begin in April 2014. We expect over the next 2 years to have our first full scale prototypes.
that produces 20 watts of power at 14 volts.We have 20 watt TEG’s
( Thermoelectric Power Generator) custom made
per application for purchase.
This is a water to water design we did for a client at a camping lodge. He’s heating a glycol closed loop with a wood stove for the hot side and cooling the cold side with water from his lake. The TEG power generator system was designed to heat trace his water line so it didn’t freeze in the winter. There is a reservoir storage unit for en-between when his stove is not working that he uses to maintain the heat in the water/glycol loop. The power is enough to run the pump and also lights in his cabin.
Maximum temperature hot side 180°C-190°C for our TEG2 modules
and 320°C (recommended) for our TEG1 modules.
Yield is ~50 watts 13.8VDC @ Delta T of ~90 Celsius. There are three liquid to liquid TEG’s in parallel for a total of 48 modules.
Self TEG power generation device
We are in the process of designing off the self TEG power generation devices for purchase. Cost is always a factor. To make them more affordable we will be offering standard Thermo Electric Power TEG Generators in 20 watts @ 12-14VDC (max.). Either water or air cooled. These will use the Seebeck Effect to produce power!
Adjacent is a 40-45 watt liquid to liquid TEG based on a Delta T of 110-120 C. Max hot side temperature is 190 C. Hot liquid is passed via the center sink and cold water is passed via both outside sinks.
Belleville washers are used to assemble the sinks and modules to the correct compression rate. Six screws are used with Belleville washers . Modules leads are left lose to allow for the client to hook up any power configuration required.
Thermo electric power generation is a maintenance free way to generate power. As long as there is a heat source and a cold source power is continuously produced.
Unlike a solar panel rated at 100 watts which, my produce only 60% of the rated power output because of sunshine and weather impairment. A thermo electric power generator will produce it rated output as long as the delta T remains the same, 24 hr. a day 365 days a year using the Seebeck Effect.
Extrusion profiles
These are extrusion profiles we are attempting to work with . Figure of merits are high giving us hope that we can automate our manufacturing process and bring costs down to a competitive level.
Our new Powder Metallurgy process if successful, will increase efficiency 20-30% over standard modules, together with modules specifically designed for high density power generation we expect thermo electric modules that will be not only more efficient but be economical enough in volume to have mass commercial applications. So far we are very encouraged by the test results. We are expecting to finalize patented TEG design by January 2014. If the new process is successful we will entertain any companies interested in licensing our technology to contact us for more information. At present we have successfully designed new Thermo Electric elements and have tested them with great success. We are now working on the conductor contacts. If successful the complete couple can be produced in four steps. The elements can be configured into any size power cell required by our customers. Our standard elements are 150 to 200 amp which is unheard of in the industry.
Presently Tecteg Mfr. carries 4 Temperature dependent TEG Modules:
- TEG2 Series modules for maximum hot side temperature of 190°C and lower.
- TEG1 Series modules for maximum hot side temperature of 320°C and lower.
- CMO’s Cascade series modules for maximum hot side temperature of 650°C and lower.
- CMO’s only series modules for maximum hot side temperature of 800°C and lower.
Beginning in the summer of 2012 , Thermal Electronics Corp. will be designing and manufacturing component and generators which can generate electricity for:
- Remote site power
- Remote telemetric power requirements
- Power generation for remote pipeline ( Oil and Gas) monitoring
- SCADA ( Supervisory Control And Data Acquisition) field power requirements
- Remote cottages and hunting camps
- Cell phone towers
- Water pipelines
Thermoelectric Power Generators will be configured into 12 VDC to 24 VDC units and 15 watts to 220 watts as standard designs . Custom designs will be available, but with greater lead times and cost.
Thermoelectric Generator
Thermoelectric Generator TEG Power Brick
A Solar Thermoelectric Device for Alternative Energy
Survival MD (Best Post Collapse First Aid Survival Guide Ever)
Backyard Innovator (A Self Sustaining Source Of Fresh Meat,Vegetables And Clean Drinking Water)
Blackout USA (EMP survival and preparedness)
Conquering the coming collapse (Financial advice and preparedness )
Liberty Generator (Build and make your own energy source)
Backyard Liberty (Easy and cheap DIY Aquaponic system to grow your organic and living food bank)
Bullet Proof Home (A Prepper’s Guide in Safeguarding a Home )
Family Self Defense (Best Self Defense Strategies For You And Your Family)
Sold Out After Crisis (Best 37 Items To Hoard For A Long Term Crisis)
Survive The End Days (Biggest Cover Up Of Our President)
You may also like …
Anyone can join.
Anyone can contribute.
Anyone can become informed about their world.
"United We Stand" Click Here To Create Your Personal Citizen Journalist Account Today, Be Sure To Invite Your Friends.
Humic & Fulvic Liquid Trace Mineral Complex
HerbAnomic’s Humic and Fulvic Liquid Trace Mineral Complex is a revolutionary New Humic and Fulvic Acid Complex designed to support your body at the cellular level. Our product has been thoroughly tested by an ISO/IEC Certified Lab for toxins and Heavy metals as well as for trace mineral content. We KNOW we have NO lead, arsenic, mercury, aluminum etc. in our Formula. This Humic & Fulvic Liquid Trace Mineral complex has high trace levels of naturally occurring Humic and Fulvic Acids as well as high trace levels of Zinc, Iron, Magnesium, Molybdenum, Potassium and more. There is a wide range of up to 70 trace minerals which occur naturally in our Complex at varying levels. We Choose to list the 8 substances which occur in higher trace levels on our supplement panel. We don’t claim a high number of minerals as other Humic and Fulvic Supplements do and leave you to guess which elements you’ll be getting. Order Your Humic Fulvic for Your Family by Clicking on this Link , or the Banner Below.
Our Formula is an exceptional value compared to other Humic Fulvic Minerals because...
It’s OXYGENATED
It Always Tests at 9.5+ pH
Preservative and Chemical Free
Allergen Free
Comes From a Pure, Unpolluted, Organic Source
Is an Excellent Source for Trace Minerals
Is From Whole, Prehisoric Plant Based Origin Material With Ionic Minerals and Constituents
Highly Conductive/Full of Extra Electrons
Is a Full Spectrum Complex
Our Humic and Fulvic Liquid Trace Mineral Complex has Minerals, Amino Acids, Poly Electrolytes, Phytochemicals, Polyphenols, Bioflavonoids and Trace Vitamins included with the Humic and Fulvic Acid. Our Source material is high in these constituents, where other manufacturers use inferior materials.
Try Our Humic and Fulvic Liquid Trace Mineral Complex today. Order Yours Today by Following This Link.
| Online: | |
| Visits: | 1,616,006,556 |
| Stories: | 8,188,046 |
Whistler Blowers, Insiders
