How to Hide from Drones (Stunning Pics and Info)
Thermal imaging is the primary method human detection on the battlefield. Whether it be a drone, an Apache helicopter, or an individual soldier, thermal imaging is the best tool available for the job. Thermal imagers work by “seeing” heat. Everything emits thermal energy, dirt, trees, rocks, humans. Thermal imaging is so successful at detecting human beings that it poses a threat to the average citizen. Don’t get me wrong, I feel every citizen should own a thermal imager as well.
In today’s world it is becoming apparent that the average individual citizen is going to under the prying eyes of the government, but what if Joe citizen has concerns about his privacy? I’ve been through countless forums where people are searching for an answer as to how one can hide from thermal imaging. We are even working on a method ourselves. While I would like to be the first to develop a product to defeat thermal imaging, I feel that I should share the challenges in doing so. If I am not successful, maybe someone else will be. All of the ideas I’ve run across so far will not work; Space blankets, glass panels, mud, wet suits, none of it works.
The key to evading thermal imaging is the same as any camouflage, just with different parameters. You will not ever “disappear” from a thermal imager, just the same as you won’t disappear just by wearing Multicam or ATACS. In visible camouflage you use colors and specific patterns to do so. You have to blend in and use cover and concealment. You wouldn’t go unnoticed wearing traditional camouflage laying down in the middle of a parking lot, you shouldn’t expect to do the same in thermal. In both examples knowing your surroundings and the characteristics of what is searching for you is the key.
Emissivity
Lets say that you had some form of cloak that could mask your thermal signature for a period of time. You might think you are home free…but nothing is that simple. Not only does every object emit thermal energy, but it does so at different rates. Human skin is highly emissive, meaning energy is radiated efficiently, more energy for the thermal imager to “see”. Aluminum foil, on the other hand, has low emissivity. If both were the same temperature and you looked at them with the camera they would look vastly different. To make matters worse, as any object warms up, it also emits more energy. It can be likened to objects changing “color” with temperature. This is why emergency blankets and panes of glass won’t help you hide. While they might mask your thermal signature, they themselves will stand out compared to your surroundings. To an observer, an emergency blanket is just as out of place in thermal as it would be in visible light.
Not only do you have to reduce your thermal signature to hide from thermal imagers, but you have to match your surroundings as well. To solve the first two equations, thermal and emissivity, you must both shield the imager from your body heat and match your surroundings. So you’ve got some kind of cloak, and you’ve covered yourself in grasses or branches native to the exact area where you are hiding, you might be “invisible” to thermal.
But wait, it doesn’t end there. Somewhat like sun casts a shadow, thermal leaves a shadow. A lawn that is partially shaded from the sun will look very different in the shadows. If you were to move from the direct sunlight in the above example into the shade, you’d stand out. This is yet another reason why thermal is effective during the day.
Nighttime, particularly long after sunset, offers its own challenges. After the sun sets different objects cool at different rates. If you were successful enough to create a cloak that can achieve near ambient air temperature you may now appear colder than your surroundings. Your best bet is to know what objects offer the closest temperature/emissivity match, tall grasses may cool faster than rocks, pine needles and leaves may be good options.
In this example the subject’s thermal signature is masked, but the air temperature is much colder than that of the ground. The cloaking device has taken on the air temperature causing an emissivity mis-match. While it is questionable that an operator looking for a human would give this a second look, it does stand out:
Shape
Camouflage uses everything from prints of foliage to complex designs that blend in with the colors and shapes of your surroundings. This must also be attempted when hiding from thermal as well, but it isn’t so easy (again?). Paints and dyes are really effective in visible light, but are almost useless in thermal. Ideally, the layer facing the imager would be constructed of different materials with mis-matched emissivities, sort of like covering yourself with leaves, branches, grasses, etc. This is probably not commercially viable, but if you were to do so by hand it would probably benefit the overall effectiveness of your camouflage. If you’ve masked your thermal signature but can’t quite match the emissivity your best bet is to look like something nearby, a rock, bush, a patch of bare dirt. Unless you can create something with very complex emissivity patterns you have to do the next best thing, not look human. This premise also holds true with optical camouflage, something as simple as crouching down can cause the human brain to not recognize the object as human.
Your Advantages Against Thermal
No technologies are infallible, thermal is no different. Most of the videos you see on YouTube involving firefights between US forces and the insurgents are already known events to the thermal operators. They’ve been called in to dispatch the terrorists. In our future make believe world, where a rogue government is hunting down citizens you can have significant advantages.
Stealth
Masking your thermal signature is no different than creating a stealth jet fighter. An F-22 Raptor is not invisible to radar, it still has the signature of a metal marble. If radar technology had the ability to see a metal marble it would negate the F-22′s advantage, but since radar doesn’t have the resolution it can’t. The same is true of thermal imagers, they have a finite resolution. It is pretty easy to understand, standard definition TV (the old stuff) had a digital resolution of 720×480 pixels. High Definition TV has a resolution of 1280×720 (720P) or 1920×1080 (1080P or Blu-Ray). Most of you know from experience that your eyes couldn’t resolve a persons face in a crowd at a sporting event on old TV, but you can now. Again, the same is true with thermal. High end military imagers are about the equivalent of 720P television. Handheld imagers are generally less than the old standard definition television. If you can reduce your thermal signature enough, the camera may not be able to resolve you.
Distance
Military imagers can detect a person at a distance of many miles, but to achieve this distance the lensing only affords a very narrow field of view, like looking through a straw. In airborne systems, the thermal imagers will generally have two selectable options, a wide field of view for surveillance, and a narrow field of view for target acquisition. Unless they’ve already seen you, they will be searching using the wider field of view. If you’ve reduced your signature by 90%, the imager needs to be 90% closer to detect you. If the imager is far enough away, even exposed body parts will not be visible.
To illustrate how distance plays a part in thermal detection below are four images at increasing distances. In the upper left picture of the below example, the imager is a few feet away from the cloak. The subject was not following directions and breathing directly into it. It is very noticeable, even though the temperature difference was negligible because the dynamic range of the scene is rather uniform and the camera can tell the difference between a few tenths of a degree. You might think the cloak has failed. In the second image, taken from 10 yards, you can see the subjects feet sticking out and you can still see the breath print as well. In the third image, at 20 yards, the breath print begins to blend in and the feet are still bright enough in the image to take notice. By the fourth image, at 30 yards, the breath print is virtually indistinguishable from the background. The feet would probably not be noticed by an operator. The fourth picture is also exhibiting a phenomenon known as thermal crossover.
Don’t get me wrong, this is a handheld imager. The distances needed to avoid detection from a military grade imager in the above example might be 10 or more times. If the feet weren’t sticking out, however, an operator might not even take notice of the small, slightly warmer area.
Thermal Crossover
Twice a day there is a phenomenon known as thermal crossover. Thermal crossover occurs after sunrise and after sunset when scene temperatures are relatively uniform. If you have been successful in masking your thermal signature you may be able to operate with almost complete ambiguity during these time periods. Here is an example of what thermal crossover looks like:
Hiding from thermal imagers is tough, but is not impossible. Hopefully we will never be in a state where we need to hide from the prying eyes of drones, or worse, hunted down, but we’d better start now trying to crack this nut. I’d be interested in any feedback from folks that have used imagers to locate people. Would you take a closer look at any of the above examples? Would you suspect a human?
This article orginally posted on TinHatRanch.com
Anyone can join.
Anyone can contribute.
Anyone can become informed about their world.
"United We Stand" Click Here To Create Your Personal Citizen Journalist Account Today, Be Sure To Invite Your Friends.
Please Help Support BeforeitsNews by trying our Natural Health Products below!
Order by Phone at 888-809-8385 or online at https://mitocopper.com M - F 9am to 5pm EST
Order by Phone at 866-388-7003 or online at https://www.herbanomic.com M - F 9am to 5pm EST
Order by Phone at 866-388-7003 or online at https://www.herbanomics.com M - F 9am to 5pm EST
Humic & Fulvic Trace Minerals Complex - Nature's most important supplement! Vivid Dreams again!
HNEX HydroNano EXtracellular Water - Improve immune system health and reduce inflammation.
Ultimate Clinical Potency Curcumin - Natural pain relief, reduce inflammation and so much more.
MitoCopper - Bioavailable Copper destroys pathogens and gives you more energy. (See Blood Video)
Oxy Powder - Natural Colon Cleanser! Cleans out toxic buildup with oxygen!
Nascent Iodine - Promotes detoxification, mental focus and thyroid health.
Smart Meter Cover - Reduces Smart Meter radiation by 96%! (See Video).
But you can’t hide from the aliens in their UFOs!
Here’s a good read that offers very interesting notes on alien bases and their designs for the human race:
http://www.blue-planet-project.com/
Just read in another post about the Denver Airport and the covering blocking heat scans… would that be a material to look into?
The entire circus-tent-like roof is made of 15 acres of Teflon-coated woven fiberglass. Ostensibly made to resemble the Rocky Mountains or the Colorado Sand Dunes, it manages to provide one more in a series of secret occult Pyramid representations. The material reflects 90% of the sunlight and conducts no heat, so it is interestingly impervious to radar and to heat scans.
How about a small blanket layered with Aerogel?
How about a picture of Joan Collins naked, that would make me turn cold?
Great post!Never heard that before.
Best, CHEAPEST IR-thermal camouflage you can EVER invest in for your home or bugout location are the 50-gallon HDPE blue water barrels. Buy a dozen, take an afternoon to prepare them.
Simply take a hole saw (or a Forstner’s bit) approximately 1-inch in diameter, start drilling holes approximately 6-inch seperated from each other, all over the side walls. Don’t drill any on the top. Now, once done, take a 1/8″ drill bit and drill six equa-distant holes (like a car wheel mounting pattern) along the edge of the barrel bottom (which, once turned upside down, will become the top).
Now, using paracord, simply suspend a mylar survival blanket from those 1/8″ holes, just like you suspend the wall covering inside a Teepee. You have made in IR-thermal hide, or blind, that will take many minutes, possibly hours, to heat up from your body heat. Just get inside the suspended mylar, and stay there. The holes in the barrel wall will act as a radiator to disperse the heat accumulating against the mylar blanket, but when scoped with an IR receiver, it will appear as nothing but a barrel exposed to outside air temps. You can even cut a small hole in the top of the mylar, to allow some venting to you inside the mylar. The barrel holes will vent the heat if you have any wind available to you.
Now, put all 10-12 at your place. Set some of them upright, lay some on their sides – so that it looks like you are haphazard and don’t care. This adds to your camouflage effect (much like a bunch of junk cars in a junkyard – few will search each car, if they realize that there are a lot of them – especially when they are relying on their technology to ‘do the work for them’.
Enjoy drone free skies while you can. Starting in September of 2015, they’ll be everywhere.
Anyone want to test this guy theory out for real? Guarantee if you are wrong you won’t feel a thing!
….and if he is right….you won’t feel a thing either.
Well if you want to be sure, try it out then! LOL!
Try cheap plastic sheeting you buy at a hardware store for a paint drop or to cover shrubs in the fall or spring.
Space Blankets aka survival blankets
the vinyl ones that have the silver on one side.
You use them with the silver side facing your body to reflect heat back to your body.
If used in this method covering your entire body and head and doubled in thickness you can defeat infrared detection.
Although it is quite uncomfortable it will get you beyond enemy lines to safety.
I think a number of the ideas, though imperfect, offer hope for defeating drone surveillance for short periods. Camouflage is not just about color, in this case, heat. It includes cover, concealment, movement, shape, etc. If the existence of the subject cannot be concealed, then the perception of the viewer must be defeated.
The barrel idea, for instance, effective employs the idea of shape. But it is not portable. If one wants mobility, one must have a concealment technique that is packable. Otherwise, just stay in your concrete, ventilated, underground bunker.
An irregular heat pattern may not always reveal the concealed individual to the viewer. Dogs, deer, horses and cattle all emit heat and display shape. Like the example of hiding in a cluttered junk yard, perhaps a comforter and space blanket might be more effective if employed in an area that has other, non-human, heat signatures.