Primitive Preps: Craft a 3-in-1 Tool from One Hand Drill Spindle

by Todd Walker

Having items in your pack which serve more than one function reduces weight and increases resourcefulness. I’ve written about this multifunctional-mindset with modern equipment here. The concept is far from modern. Otzi the Ice Man carried multifunctional primitive tools over 5,300 years ago.

Here’s our experimental archeology project…

Multifunctional Spindles

How many redundant uses can we find for a hand drill spindle other than its primary use… friction fire embers?

If you have access to river cane, one spindle becomes multifunctional:

• Friction Fire
• Primitive Drill
• Container

Friction Fire

Finding dry, straight wood long enough for a spindle in the field is challenging. Sticks in the 4 to 6 inch range is more likely. They don’t even have to be straight to be used as a friction fire fore shaft in a cane spindle. A quick whittling job will make them fit.

To make the multifunctional spindle, straighten a section of river cane to your desired length in the 1/2 to 5/8 inch diameter range. Make two splits on one end perpendicular to one another just above the end node. Wrap the split with sinew with about a half-inch of split cane extending past the wrap. These four split sections will grip the fore shaft stubs as collets would on a brace and bit.

In my experience, simply carving or abrading the fore shaft in a cone shape is enough to create a tight friction fit in the spindle. However, carving an elongated pyramid shape (similar to brace and bit augers) on the fore shaft would add extra bite inside the collet grooves.

Primitive Drill

I discovered a gold mine of quartz crystals in a store in downtown Athens, GA. With this project in mind, I bought several in different sizes. A few are now stowed in my haversack for primitive skills tasks.

If you can’t locate crystals for purchase, a bit of bipolar percussion can create serviceable drill tip. Use a hammer stone and strike the top of a smaller pebble until it shatters. With any luck you’ll have a sharp drill tip and no bludgeoned knuckles. If not, keep smashing rock and you’ll likely get both.

Insert your drill tip in the spindle and spin it on your hearth board to drill a perfectly round pivot hole. One or two passes with your hands on the spindle should work depending on the hardness of your hearth material. The trumpet vine I used in the video below is soft which makes it an excellent hearth board.

For more robust wood, or even other rock or shells, craft a spindle which can be used in a bow drill set. The end of the river cane spindle which meets the bearing block would need a carved hardwood plug to mate with the bearing block socket. More downward pressure and speed can be applied with a bow drill set than hand drill. Plus, you’ll save the skin on your hands.

Container

Leave enough hollow shaft on the end of the cane opposite the drilling end. While this chamber isn’t very large, repair needles, charred material, or other small items can be stored inside. Whittle a cap to plug the open end. Another cap option is a larger diameter piece of cane with the node joint in place which slides over the open end.

I’ve given three uses for one spindle. What are some others you can share?

Keep Doing the Stuff of Self-Reliance,

Todd

P.S. – You can also keep up with the Stuff we’re Doing on Twitter, Pinterest, Google +, YouTube, Instagram, and Facebook… and over at the Doing the Stuff Network.

P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…

Thanks for Sharing the Stuff!

Copyright: Content on this site (unless the work of a third-party) may be shared freely in digital form, in part or whole, for non-commercial use with a link back to this site crediting the author. All links in articles must remain intact as originally posted in order to be republished. If you are interested a third-party article, please contact the author directly for republishing information.