7 Tips And Tricks For Reloading Your Ammo

Aaron Spuler is a firearms enthusiast and recreational shooter. Follow more or his work at The Weapon Blog

Having trouble reviewing successful ammo reload? Here you can find the top 7 tips for reloading ammo. These tips can keep your first ammo reloads from being too stressful.

Do you know what the best tools are? Have you considered a place for reloading ammo? Do you know what cartridges and powders you will be working with? All of these questions won’t be a problem with the information we’ve compiled below.

1. Single-stage press

There is no single tool or way to reload ammunition. Among all the options out there, the single-stage press can make the job easier in large quantities.

Of course, some people may think that a progressive press offers a formidable result. However, a single-stage press may be the best choice for beginners.

This tool requires a very simple learning process. In general, the amount of hassle that a single-stage press could offer is minimal. If you are a novice user, a single-stage press can offer a good amount of ammunition.

There are very affordable options that can complete your shop. Also, an excellent single-stage press should be able to deal with multiple calibers.

2. Having the right location

In this case, it doesn’t matter too much if your house or apartment is too big or too small. The most important thing here is that you have adequate space to go through the ammunition reloading procedure.

It is not necessary to have an overly professional workshop from the start. Any professional workshop always starts as a small space dedicated to reloading ammunition.

So, it is useful to consider a table or a surface on which you can work. Along with that, you should have a bench or seat and some furniture for parts storage.

In other words, the organization of the space dedicated to reloading ammunition is important. Even in the smallest apartments, there is always some efficient way to make the most of the space.

3. Reloading manual

Ammunition reloading manuals and brief internet guides do not provide the same information. So, it is always necessary to have an ammunition reloading manual to avoid different mistakes.

It is very easy to find some information that seems obvious but is often forgotten afterward. Besides, we can consider that even people with a lot of experience in this still consult reloading manuals.

In this way, you will be able to consult about:

• Different types of ammunition

• Pressure value for each ammunition

• The capacity of each cartridge

• Powder burning speed

• Minimum and maximum loads

Knowing each of these secrets is what allows you to avoid mistakes from the beginning. There are even many ammunition reloading manuals that will help you with different tools.

4. Having special tools

There is a group of tools that can be very useful to be able to perform an excellent ammunition reloading.

• Digital scales: Digital scales are a necessary tool for reloading ammunition. You can add the exact amount of powder to each cartridge. A corded digital scale that is also battery-operated is usually very useful.

• Cartridge gauges: This tool prevents incomplete or excessive powder loading in each cartridge. Here I recommend finding the exact gauge for each specific cartridge size.

• Kinetic bullet extractor: Many times if you are a beginner user you will make mistakes. Of course, that is part of learning. I recommend a kinetic bullet extractor like an essential implement. I use again the brass, and then start the reloading procedure with the same cartridge again.

5. Powder measurements

In any procedure, powder measurements must be of high quality to avoid the first beginner’s mistakes. In principle, we should consider that the right amount of powder is what makes certain ammunition safe.

On the contrary, an excessive amount of powder may be that certain ammunition is too dangerous. Here it may be necessary to have a certain budget for an efficient powder measure.

Here a progressive press that incorporates a powder measure can be very useful. This can provide a much more complete tool that must be set up before use. Those who can pass the initial learning procedure may notice good results at the end.

6. Type of powder

The word you can get for each cartridge is usually not the same across the board. Depending on the size of the cartridge a user wishes to have there are different types of powder.

So, if you do not check the types of powder available for each cartridge this may produce some errors. In some cases, it may be dangerous while in other cases the cartridge may be inefficient.

In turn, priming the cartridges is an important step in any case. Smokeless powder is the most common type of powder used for firearms.

This type of gunpowder is also known as white powder. Smokeless powder is the option that leaves little residue. It is, of course, the most used gunpowder today.

Main Types of Gunpowder

7. Dealing with the belly lump

Many brass cartridges may exhibit a bulging of the belly after each shot. Often, this happens because the powder cartridge has too much charge.

In turn, intermediate or low-quality brass cartridges are often very prone to this type of situation. That is why having high-quality brass cartridges can easily avoid this problem.

One effective solution is to purchase a lump removal kit. Today, many manufacturers are developing such tools. So the options and qualities are wide.

https://www.youtube.com/watch?v=ZEwFNcpCAB8

Conclusion

Incorporating these top 7 tips for reloading ammo can facilitate the first experiences of gun enthusiasts. Plus having a one-stage press can make a difference. Either way, feel free to leave a comment below if you still have questions.

Good advice helps to avoid beginner’s mistakes. Besides, these tips are what allows anyone to become an expert in reloading guns.